Image for Roberts 3.5 Gallon Ceramic Tile Adhesive from HD Supply
+ / - Hover over image to Zoom

Roberts 3.5 Gallon Ceramic Tile Adhesive

Part 240095
MFG PART 5900-3
Brand Roberts
$68.65
Shipping charges may apply
Usually ships within 2 days
Restocking fees may apply

About this item

  • Roberts 3.5 Gallon Ceramic Tile Adhesive
  • For The Interior Installation Of Porous And Semi-Porous Ceramic Tile (Wall Tile Up To 12 In. X 12 In. Or 5 Lbs. And Floor Tile Up To 8 In. X 8 In.), Porcelain Wall Tile (Up To 6 In. X 6 In.), Mosaic Tile, Natural Stone, Quarry And Thin Brick Veneers
  • Bonds With Concrete, Masonry, Cement Backer Board, Cement Mortar Beds, Cured Portland Cement Plaster, Gypsum Wallboard, Coated Glass Mat Backer Board, Water Resistant Gypsum Wallboard, Existing Ceramic Or Resilient Tile, Plastic Laminate And Association Grade (Canply/Apa) Exterior Plywood
  • Ideal For Direct Bond Installation
  • Premixed And Ready-To-Use For Faster Installation
  • Restrict Foot Traffic And Moving Of Heavy Objects For 24 To 48 Hours To Allow Adhesive To Cure Properly
  • Covers Approximately 40 To 48 Sq. Ft. Per Gallon When Applied With A 3/16 In. X 5/36 In. V-Notch Trowel And 20 To 30 Sq. Ft. Per Gallon When Applied With A 1/4 In. X. 1/4 In. X. 1/4 In. Square-Notch Trowel
  • 1 Year Limited Warranty
  • Not For The Installation Of Ceramic Tile Fixtures, Green Marble Or Lug Back Tile
  • Mfg #5900-3
California residents: Prop 65 Warnings

Warning

WARNING: This product can expose you to chemicals including Quartz, Formaldehyde and Ethyl Acrylate, which [is] are known to the State of California to cause cancer and birth defects or other reproductive harm. For more Information go to www.P65Warnings.ca.gov

www.P65Warnings.ca.gov